National Item Identification Number
00-276-2870
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1X0J7
VOLVO CONSTRUCTION EQUIPMENT NORTH
AMERICA INC
1 VOLVO DR
ASHEVILLE
NC
28803
828-650-2174
63477
63477
63477
63477
Reference Numbers (Part Numbers)
FC3710
FC3710
FC3710
FC3710C
F3710
F3710C
234872
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HARDNESS RATI
Required Description
STEEL COMP 1010 OVERALL
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
COPPER O