National Item Identification Number
00-298-0762
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
79150
DANA CORP
VICTOR PRODUCTS DIV
1945 OHIO ST
LISLE
IL
60532
630-271-0001
29510
31007
92679
29510
31007
92679
29510
31007
92679
Reference Numbers (Part Numbers)
37008
54763D
54763D
54763D
60876D
60876D
60876D
68070D
68070D
68070D
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
CORK OVERALL
HH-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
2.125 INCHES N