National Item Identification Number
00-298-6364
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
06350
ASSET SYSTEMS INC.
24W500 MAPLE AVENUE SUITE 214
NAPERVILLE
IL
60540
630-955-0000
22888
06350
ASSET SYSTEMS INC.
24W500 MAPLE AVENUE SUITE 214
NAPERVILLE
IL
60540
630-955-0000
22888
50492
IDSC HOLDINGS
DBA EQUISERV
355 EXCHANGE AVE
2930
CONWAY
AR
72032
501-450-1512
06350
ASSET SYSTEMS INC.
24W500 MAPLE AVENUE SUITE 214
NAPERVILLE
IL
60540
630-955-0000
22888
Reference Numbers (Part Numbers)
16087A
16087A
17236
17236
17236
20982
20982
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
RUBBER SYNTHETIC OVERALL
0.672 INCHES MINIMUM AND
0.703 INCHES MAXIMUM
1 ROUN