National Item Identification Number
00-539-5311
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
15605
EATON CORP
OPNS & TECHNICAL CENTER
4201 N 27TH ST
MILWAUKEE
WI
53216
414-449-6207
15605
EATON CORP
OPNS & TECHNICAL CENTER
4201 N 27TH ST
MILWAUKEE
WI
53216
414-449-6207
Reference Numbers (Part Numbers)
16-2049
16-421-4
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
COPPER ALLOY OVERALL
SILVER OVERALL
0.265 INCHES NOMINAL
1 ROUND
0.500 INCHE