National Item Identification Number
00-585-3788
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
59180
IMO INDUSTRIES INC.
DBA IMO PUMP DIVISION DIV IMO PUMP
1710 AIRPORT RD
MONROE
NC
28110
704-289-6511
16712
SIEMENS DEMAG DELAVAL TURBOMACHINERY
INC.
840 NOTTINGHAM WAY
TRENTON
NJ
08638
609-890-5473
59180
IMO INDUSTRIES INC.
DBA IMO PUMP DIVISION DIV IMO PUMP
1710 AIRPORT RD
MONROE
NC
28110
704-289-6511
Reference Numbers (Part Numbers)
SG3620PC30
SG3620PC30
S2110JB
S2110JB
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
2.020 INCHES MINIMUM AND
2.025 INCHES MAXIMUM
1 ROUND
3.500 IN