National Item Identification Number
00-616-3023
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://radiosets.tpub.com//TM-11-5895-221-24P/TM-11-5895-221-24P0015.htm
Referenced on: http://radiosets.tpub.com//TM-11-5895-221-24P/TM-11-5895-221-24P0078.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
79466
AESYS TECHNOLOGIES LLC
693 NORTH HILLS ROAD
YORK
PA
17402
717-755-1081
80372
MARINE CORPS
NAVY ANNEX
WASHINGTON
DC
20380
34623
Reference Numbers (Part Numbers)
MS15795-212
MS15795-212
WA35
5118-155-19
5118-155-19
5437
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
IRON AND
STEEL OVERALL
CADMIUM OR
ZINC OVERALL
0.365 INCHES MINIMUM AND
0.3