National Item Identification Number
00-820-4820
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
73734
FEDERAL SCREW PRODUCTS INC
9742 W FOSTER ST
ROSEMONT
IL
60018
773-992-2600
1VN02
AIRDALE EXPRESS LLC
502 STARKSTONE CT
SPRING
TX
77386
281-419-9444
18778
THALES COMPONENTS
40G COMMERCE WAY
TOTOWA
NJ
07512
973-812-4332
94117
BAE SYSTEMS INFORMATION AND
ELECTRONIC SYSTEMS INTEGRATION
65 SPIT BROOK RD
NASHUA
NH
03060
603-885-3232
Reference Numbers (Part Numbers)
1470
1470ADX
62006910
9336C3007
9336C3007
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
WOOL OR
COTTON OR
CELLULOSE OR
GLASS OVERALL
0.125 INCHES NOMINAL
1 ROUND;