National Item Identification Number
00-830-8818
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
02978
L-3 COMMUNICATIONS CORPORATION
DBA COMBAT PROPULSION SYSTEMS
76 S GETTY ST
MUSKEGON
MI
49442
231-724-2631
02978
L-3 COMMUNICATIONS CORPORATION
DBA COMBAT PROPULSION SYSTEMS
76 S GETTY ST
MUSKEGON
MI
49442
231-724-2631
1H6M3
AMERICAN TERRA VEHICLES INC
OAK WILT SERVICE PITNEY BOWES
6423 PARKLAND DR SUITE A
SARASOTA
FL
34243
915-922-3116
Reference Numbers (Part Numbers)
AA7FA
AA7FA213
AA7FA213
AA7FA213
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
ALUMINUM OVERALL
0.302 INCHES MINIMUM AND
0.322 INCHES MAXIMUM
1 ROUND
1.052