National Item Identification Number
00-882-1686
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
11568
GARDNER DENVER INC
DBA CHAMPION AIR COMPRESSORS
1301 N EUCLID AVE
PRINCETON
IL
61356
815-875-3321
66289
WISCONSIN MOTORS LLC
2020 FLETCHER CREEK DR
MEMPHIS
TN
38133
901-371-0353
96046
CRANE PUMPS & SYSTEMS INC
420 3RD ST
PIQUA
OH
45356
937-615-3553
75377
KURZ & ROOT GENERATOR COMPANY LLC
35 SARGENT DR
BETHANY
CT
06524
203-393-9304
19207
Reference Numbers (Part Numbers)
JHP33-59
PH193
PH193
1021-334
18530
460D1-0524
7974014
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CORK OVERALL
1.234 INCHES NOMINAL
1 ROUND
1.875 INCHES NOMINAL
1 ROUND
1 RE