National Item Identification Number
00-901-2451
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
03670
ANSUL INCORPORATED
WORMALD U S INC
ONE STANTON STREET
MARINETTE
WI
54143
715-735-7411
03670
ANSUL INCORPORATED
WORMALD U S INC
ONE STANTON STREET
MARINETTE
WI
54143
715-735-7411
96169
96169
96169
96169
Reference Numbers (Part Numbers)
A20-09188
F20-09573PC16
2640-283PC9
2640-622PC9
75865-46X1PC9
845-2109845PI
Required Categories
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
CRITICALITY CODE JUSTIFICATION
Required Description
MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH
ACTIVITY HX QUALITY CONTROL, MA