National Item Identification Number
00-943-1048
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
81412
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
81412
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
81412
D9182
81412
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
81412
03950
NAVAL INVENTORY CONTROL POINT
MECHANICSBURG
5450 CARLISLE PIKE
2020
MECHANICSBURG
PA
17055
717-605-3500
Reference Numbers (Part Numbers)
19145A
19145ACP
19145AJ
19145AJCP
19145AJCP
19145MKAJ
19145PCMKAJ
19145PC
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PLASTIC OVERALL
0.363 INCHES MINIMUM AND
0.365 INCHES MAXIMUM
1 ROUND
0.563