National Item Identification Number
01-005-8653
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1J4P3
DYNAMIC GUNVER TECHNOLOGIES LLC
DBA SMITHS AEROSPACE COMPONENTS -
967 PARKER STREET
MANCHESTER
CT
06040
860-647-5584
77445
79043
9D030
METAL PRODUCTS CORP
5 OLD WINDSOR RD
BLOOMFIELD
CT
06002
860-242-0448
98500
AGC INCORPORATED
106 EVANSVILLE AVE.
MERIDEN
CT
06451
203-317-2655
Reference Numbers (Part Numbers)
709373CL8
709373CL8
709373CL8
709373CL8
709373CL8
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 410 OVERALL
AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
0.31