National Item Identification Number
01-013-5805
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_130.htm
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_151.htm
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_156.htm
Referenced on: http://compressors.tpub.com//TM-5-4310-354-24P/css/TM-5-4310-354-24P_160.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
16004
29215
JENNY PRODUCTS INCORPORATED
850 NORTH PLEASANT AVENUE
SOMERSET
PA
15501
814-445-3400
55683
WHEELER BROS. INC.
384 DRUM AVE
SOMERSET
PA
15501
814-443-7000
NSN (National Stock Number) 5310-01-013-5805, 5310010135805 NIIN (National Identification Number) 01-013-5805, 010135805
Part Numbers (Reference Numbers)
62864
62864
685-62864
Required Categories
MATERIAL
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMET
Required Description
RUBBER SYNTHETIC OVERALL
75.0 DUROMETER NOMINAL
0.250 INCHES MINIMUM AND
0.31