National Item Identification Number
01-295-6170
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
56161
GENERAL DYNAMICS LAND SYSTEMS
CANADA CORP
1991 OXFORD ST E
LONDON
N5V 2Z7
CANADA
519-964-5900
34914
HIAB INC.
KSTP-TVROTHERS INC DBA COMPRO DIV
12233 WILLIAMS ST
PERRYSBURG
OH
43551
419-482-6000
36513
ATLAS POLAR CO LTD
60 NORTHLINE RD
160 STA O
TORONTO
M4A 2N3
CANADA
416-751-7740
Reference Numbers (Part Numbers)
10524128
315-4921
315-4921
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
10.5 MILLIMETERS NOMINAL
1 ROUND
32.0 MILLIMETERS NOMINAL
1 RO