National Item Identification Number
01-315-8870
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
23808
SUPERIOR COMPANIES
101 N JOHNSTONE AVE
BARTLESVILLE
OK
74003
918-336-5075
30003
07878
AERONAUTICAL AND SUPPORT EQUIPMENT
TYPE DESIGNATION SYSTEM /ASETDS/
4375 CHIDLAW RD BLDG 262 RM B-108
WPAFB
OH
45433
Reference Numbers (Part Numbers)
270AS129-1
270AS129-1
48A7858
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
COPPER ALLOY 101 OR
COPPER ALLOY 102 OR
COPPER ALLOY 104 OR
COPPER ALLOY 105