National Item Identification Number
00-167-1726
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
46467
ACF COMPONENTS & FASTENERS INC
INCORPORATED
31012 HUNTWOOD AVE
HAYWARD
CA
94544
510-487-2100
81755
18355
88277
001JK
81755
19203
Reference Numbers (Part Numbers)
AN960-D616
AN960D616
D616
FFW92
07010AL25-063
124682-6D10-064
124682-6D10-
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
ALUMINUM ALLOY 2024 OVERALL
QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERAL