National Item Identification Number
00-171-3679
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
55469
ESSEX PRECISION CONTROLS INC.
6 SUNNEN DR
SAINT LOUIS
MO
63143
314-644-3000
79150
DANA CORP
VICTOR PRODUCTS DIV
1945 OHIO ST
LISLE
IL
60532
630-271-0001
24617
70040
GENERAL MOTORS CORP
AC ROCHESTER DIV
4800 S SAGINAW ST
1360
FLINT
MI
48501
810-835-8322
Reference Numbers (Part Numbers)
153454
19033
855012
855012
855012
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER OVERALL
0.251 INCHES MINIMUM AND
0.255 INCHES MAXIMUM
1 ROUND
0.381 I