National Item Identification Number
01-399-0439
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
26512
9F512
DENISON HYDRAULICS INC
14249 INDUSTRIAL PKWY
MARYSVILLE
OH
43040
937-644-4445
9F512
DENISON HYDRAULICS INC
14249 INDUSTRIAL PKWY
MARYSVILLE
OH
43040
937-644-4445
53711
9F512
DENISON HYDRAULICS INC
14249 INDUSTRIAL PKWY
MARYSVILLE
OH
43040
937-644-4445
Reference Numbers (Part Numbers)
F525-11162-528
M19-21121-D PC 163
PL-M19-21121-D PC 163
124-4400059 PC
345-1
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
STEEL OVERALL
CADMIUM AND
CHROMATE OVERALL
QQ-P-416, TY2, CL2 FED SPEC SINGLE