National Item Identification Number
01-433-1838
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
57574
VELAN VALVE CORPORATION
94 AVENUE C
WILLISTON
VT
05495
802-863-2562
6A441
COOK BROS MFG AND SUPPLY CO
1030 CALLE RECODO
SAN CLEMENTE
CA
92672
949-361-8767
Reference Numbers (Part Numbers)
9916-000 REV C 2.50IN IT8
9916-000 REV C 2.50IN IT8
Required Categories
Required Description