National Item Identification Number
01-437-6731
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
U8739
SMITH & NEPHEW HEALTHCARE LTD
2/3 THE TECHNOPARK NEWMARKET ROAD
CAMBRIDGE
CB5 8PB
UNITED KINGDOM
01223 568100
89245
SMITH AND NEPHEW INC
1450 E BROOKS RD
MEMPHIS
TN
38116
901-396-2121
Reference Numbers (Part Numbers)
10-2701
10-2701
Required Categories
OVERALL DIAMETER
III END ITEM IDENTIFICATION
Required Description
2.0 MILLIMETERS NOMINAL
ILIZAROV SYSTEM, BOLTS, NUTS AND WASHERS, SMITH AND NEP