National Item Identification Number
01-440-3725
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
2K210
WILMINGTON INSTRUMENT CO INC
332 N FRIES AVE
WILMINGTON
CA
90744
310-834-1133
72256
ERNST FLOW INDUSTRIES
116 MAIN STREET
FARMINGDALE
NJ
07727
732-938-5641
Reference Numbers (Part Numbers)
926 IT5
926 IT5
Required Categories
Required Description