National Item Identification Number
01-461-5957
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1D1T5
EXCEL TECHNOLOGIES INTERNATIONAL
CORPORATION
1110 INDUSTRIAL BLVD
SUGAR LAND
TX
77478
281-240-6770
62950
EXCELTEC INTL CORP
1110 INDUSTRIAL BLVD
SUGAR LAND
TX
77478
281-240-6770
Reference Numbers (Part Numbers)
87323
87323
Required Categories
Required Description