National Item Identification Number
01-481-7832
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
04804
NORTHROP GRUMMAN SYSTEMS CORP
ES POWER CONTROL SYSTEMS - MS8910
7301 SYKESVILLE RD
SYKESVILLE
MD
21784
410-552-2455
1L160
SUPERIOR WASHER & GASKET CORP
170 ADAMS AVE
407
HAUPPAUGE
NY
11788
631-273-8282
Reference Numbers (Part Numbers)
2051F51 ITEM 129
300-2158-015
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL CORROSION RESISTING OVERALL
0.465 INCHES NOMINAL
1 ROUND
0.642 INCHES N