National Item Identification Number
01-513-8600
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
51900
ITT INDUSTRIES INC.
DBA ITT STANDARD
175 STANDARD PKWY
CHEEKTOWAGA
NY
14227
716-862-4053
51900
ITT INDUSTRIES INC.
DBA ITT STANDARD
175 STANDARD PKWY
CHEEKTOWAGA
NY
14227
716-862-4053
Reference Numbers (Part Numbers)
3-693-2-10-002-01
5-131-10-045-003 PC 8
Required Categories
MATERIAL
HOLE DIAMETER
SPECIAL FEATURES
III END ITEM IDENTIFICATION
Required Description
COPPER ALLOY OVERALL
0.649 INCHES MINIMUM AND
0.686 INCHES MAXIMUM
COPPER NIC