National Item Identification Number
00-202-4187
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
66503
11083
U0189
TURNER DIESEL LTD WOODWARD GOVERNORS
& CONTROLS
UNIT 2 ORTHEUS HOUSE CALLEVA HOUSE
ALDERMASTON READING
RG7 8TA
UNITED KINGDOM
0118 981 5176
31361
66503
Reference Numbers (Part Numbers)
03004A140
2F6683
206071
206071
206071
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CELLULOSE OVERALL
1.125 INCHES NOMINAL
1 ROUND
1.500 INCHES NOMINAL
1 ROUND;