National Item Identification Number
01-522-7676
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0Y6F4
WASTE CONTROL SYSTEMS INC
2835 MERRYMANS MILL RD
PHOENIX
MD
21131
410-252-9360
0Y6F4
WASTE CONTROL SYSTEMS INC
2835 MERRYMANS MILL RD
PHOENIX
MD
21131
410-252-9360
Reference Numbers (Part Numbers)
FIG12 ITEM 3-6
5013
Required Categories
Required Description