National Item Identification Number
12-164-1016
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8090
SEEGER ORBIS GMBH & CO. OHG
14 60
KOENIGSTEIN
GERMANY
06174-205-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D7032
WESTFALIA SEPARATOR MINERALOEL
SYSTEMS GMBH
OSTERADE 18A
HAMBURG
21031
GERMANY
040-73933618
Reference Numbers (Part Numbers)
DIN988-S12X18
SS12X18X1-2
S12X18DIN988
0026-2910-000
0026-2910-000
Required Categories
Required Description