National Item Identification Number
12-301-6574
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
C1084
RECARO AIRCRAFT SEATING GMBH & CO.
10 03 06
SCHWAEBISCH HALL
GERMANY
0791-503-7000
C2594
ELASTOGRAN GMBH
GESCHAEFTSBEREICH HALBZEUG UND BAUTE
1140
LEMFOERDE
GERMANY
05443-12-0
D5411
RECARO GMBH & CO FAHRZEUGSITZE
STUTTGARTER STRASSE 73
KIRCHHEIM
73230
GERMANY
07021-93-5000
Reference Numbers (Part Numbers)
06769
06769
06769
Required Categories
Required Description