National Item Identification Number
14-256-3117
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0188
BLANC AERO INDUSTRIES
193 R DE BERCY
PARIS 12
75012
FRANCE
0
F6647
SERVICE CENTRAL DES ACHATS DE LA MAI
ENANCE SCAM
ETS ING GENERAL JAYAT
BP 299
VERSAILLES SATORY
78013
FRANCE
01 39 67 27 09
F0111
F0111
K0058
F0086
EADS SOCATA
TARBES LOURDES PYRENEES
LOUEY
65290
FRANCE
05 62 41 73 00
F1688
GOODRICH ACTUATION SYSTEM SAS
106 R FOURNY
BUC
78530
FRANCE
01 39 20 52 00
F0111
F0111
F0111
Reference Numbers (Part Numbers)
BA-J01CA040
F300 0T 015 4923
L23111-040CA
L23111-40CA
MDS0060-40C
Z00.N5701
Required Categories
Required Description