National Item Identification Number
14-325-9632
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0111
F0111
F0188
BLANC AERO INDUSTRIES
193 R DE BERCY
PARIS 12
75012
FRANCE
0
F7411
MECAERO
BD DU GRAND CASTAING ZI
ROQUES
31120
FRANCE
05 61 51 82 30
F5385
SECTION DE CODIFICATION 85 DGA/SMA/A
/CP
CUERS PIERREFEU
BP 80
CUERS
83390
FRANCE
0494131300
Reference Numbers (Part Numbers)
L23118-100DGJ
23118DG100J
23118DG100J
23118DG100J
85-800-4682
Required Categories
Required Description