National Item Identification Number
14-498-5011
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
F3000
DCMAT DIRECTION CENTRALE DU MATERIEL
DE L'ARMEE DE TERRE
QU GEN JAYAT SATORY
14 R ST DOMINIQUE
VERSAILLES
78000
FRANCE
01 39 67 20 11
Reference Numbers (Part Numbers)
A10.5DIN125-ST-B3B
A10-5DIN125STB3B
91971660
Required Categories
Required Description