National Item Identification Number
15-100-0892
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
6K580
METRIC BOLT & NUT CO INC. OF SOUTH
CAROLINA
3359MEETING STREET RD
CHARLESTON
SC
29405
843-566-0060
A0106
ISOTTA FRASCHINI MOTORI SPA
VIALE FRANCESCO DE BLASIO
ZONA INDUSTRIALE
BARI
70123
ITALY
0039080/5345252
A0106
ISOTTA FRASCHINI MOTORI SPA
VIALE FRANCESCO DE BLASIO
ZONA INDUSTRIALE
BARI
70123
ITALY
0039080/5345252
0VP52
FINCANTIERI MARINE SYSTEMS NORTH
AMERICA INC.
800 PRINCIPAL CT STE C
CHESAPEAKE
VA
23320
361-758-9878
Reference Numbers (Part Numbers)
COPPER SEAL RING 16 X 24 X 1.5
241A0106936581 645U01
936581645U01
936581645U0
Required Categories
Required Description