National Item Identification Number
15-119-9527
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
A0106
ISOTTA FRASCHINI MOTORI SPA
VIALE FRANCESCO DE BLASIO
ZONA INDUSTRIALE
BARI
70123
ITALY
0039080/5345252
A0106
ISOTTA FRASCHINI MOTORI SPA
VIALE FRANCESCO DE BLASIO
ZONA INDUSTRIALE
BARI
70123
ITALY
0039080/5345252
A3503
DIESEL RICERCHE SPA
BAGNOLI DELLA ROSANDRA 334
SAN DORLIGO DELLA VALLE TS
34018
ITALY
0039040/3193111
0VP52
FINCANTIERI MARINE SYSTEMS NORTH
AMERICA INC.
800 PRINCIPAL CT STE C
CHESAPEAKE
VA
23320
361-758-9878
Reference Numbers (Part Numbers)
74667
74667F01
74667F01
74667F01
Required Categories
Required Description