National Item Identification Number
66-147-0981
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
Z4986
BAE SYSTEMS AUSTRALIA PTY LTD
40-52 TALAVERA RD
NORTH RYDE
2113
AUSTRALIA
08 8480 7554
Z5454
DEPT OF DEFENCE DMO
LAND SYSTEMS DIVISION
661 BOURKE ST
MELBOURNE
3000
AUSTRALIA
+61 3 9282 7820
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
Reference Numbers (Part Numbers)
DE250980024-09
DE250980024-09
DIN125A A2M6
Required Categories
Required Description