National Item Identification Number
00-929-3509
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-545-24P/css/TM-9-6115-545-24P_248.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-545-24P/css/TM-9-6115-545-24P_401.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
6N299
AGCO CORP
PARTS OPN
1500 N RADDANT RD
BATAVIA
IL
60510
630-879-3300
6N299
AGCO CORP
PARTS OPN
1500 N RADDANT RD
BATAVIA
IL
60510
630-879-3300
89926
89926
NSN (National Stock Number) 5310-00-929-3509, 5310009293509 NIIN (National Identification Number) 00-929-3509, 009293509
Part Numbers (Reference Numbers)
4053409
4053409-1
40534091
74053409
Required Categories
MATERIAL
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMET
Required Description
RUBBER SYNTHETIC OVERALL
55.0 DUROMETER MINIMUM AND
65.0 DUROMETER MAXIMUM
0.