National Item Identification Number
12-124-0178
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D1481
MEFLEX TELECONTROL GMBH & CO
1152
EHRINGSHAUSEN
GERMANY
06443-82600
D8015
BOSCH ROBERT GMBH
GESCHAEFTSBEREICH KH
41 09 60
KARLSRUHE
GERMANY
0721-942-2254
K0967
D8015
BOSCH ROBERT GMBH
GESCHAEFTSBEREICH KH
41 09 60
KARLSRUHE
GERMANY
0721-942-2254
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
C0186
PLEIGER KUNSTSTOFF GMBH & CO. KG
GMBH & CO. KG
3263
WITTEN
GERMANY
02324-398-0
D8120
KODAK VERWALTUNG AG
HEDELFINGER STRASSE 54-60
STUTTGART
70327
GERMANY
0711-406-0
Reference Numbers (Part Numbers)
A3,2DIN125-ST
DIN125-A3,2-ST
DIN125-A3,2-140HV
E740020801
NMS6-2X
X00243
2
Required Categories
Required Description