National Item Identification Number
00-219-3105
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
11877
NEWPORT SCIENTIFIC INC
HYGRODYNAMIC PRODUCTS DIV
8246 E SANDY COURT
JESSUP
MD
20794
301-498-6700
32874
BS&B SAFETY SYSTEMS L.L.C.
DIV OF INTERNATIONAL SYSTEMS AND
7455 E. 46TH STREET
TULSA
OK
74145
918-664-3843
Reference Numbers (Part Numbers)
77BOE012
77B0E012
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
0.717 INCHES MINIMUM AND
0.719 INCHES MAXIMUM
1 ROUND
1.000 IN