National Item Identification Number
00-245-0376
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
26505
GROVE VALVE OPERATIONS
DBA GROVE VALVE AND REGULATOR
11100 WEST AIRPORT BLVD
STAFFORD
TX
77477
281-879-3841
26505
GROVE VALVE OPERATIONS
DBA GROVE VALVE AND REGULATOR
11100 WEST AIRPORT BLVD
STAFFORD
TX
77477
281-879-3841
D9182
Reference Numbers (Part Numbers)
B27599-8
N730 PIECE 29
N753 PIECE 29
5000S4823F841337PC12
700C61-4
Required Categories
MATERIAL
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMET
Required Description
RUBBER SYNTHETIC OVERALL
90.0 DUROMETER NOMINAL
0.750 INCHES NOMINAL
1 ROUND;
