National Item Identification Number
00-245-5534
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
62983
62983
62983
62983
2Y614
LBCE PARTNERSHIP LLLP
DBA LINK-BELT CONSTRUCTION EQUIPMENT
2651 PALUMBO DRIVE
LEXINGTON
KY
40509
859-264-6260
Reference Numbers (Part Numbers)
CR122524PC24
CR122525PC24
CR15750PC224
CR15778PC224
CVB43S1605-556985PC12
C
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
LEATHER OVERALL
KK-L-157,SECTION A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
0
