National Item Identification Number

00-262-6219

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

58588

---

SURFACECOMBUSTION INC
1700 INDIAN WOOD CIR
MAUMEE
OH
43537
419-891-7150

---

05055

---

DIVERSIFIED AEROSPACE SERVICES LLC
DBA LLOYD AIRCRAFT COMPANY
5914 WOODMEADOW DRIVE
ARLINGTON
TX
76016
817-498-5813

---

Reference Numbers (Part Numbers)

C45A28
9126262-01

Required Categories

MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM

Required Description

COPPER OVERALL
CADMIUM OR
ZINC OVERALL
0.214 INCHES MINIMUM AND
0.227 INCHES