National Item Identification Number
00-266-0596
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
06848
3VPW3
PRECISION ENGINES LLC
3220 100TH ST SW BLDG E
EVERETT
WA
98204
425-347-2800
65702
PRECISION AIRMOTIVE CORP
3220 100TH ST SW SUITE E
EVERETT
WA
98204
425-739-9997
73370
ALLIED AUTOMOTIVE
ALLIED AFTERMARKET DIV
39 OLD RIDGEBERRY RD
DANBURY
CT
06810
203-830-7800
Reference Numbers (Part Numbers)
P3779
P3779
P3779
P3779
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CELLULOSE OVERALL
0.562 INCHES NOMINAL
1 ROUND
0.750 INCHES NOMINAL
1 ROUND;