National Item Identification Number
00-275-1479
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
05415
LINDE LIFT TRUCK CORP.
2450 WEST 5TH NORTH ST
SUMMERVILLE
SC
29483
843-875-8000
1ML14
D W HERCULES LLC
DBA HERCULES ENGINE COMPONENTS DIV
2770 ERIE ST S
MASSILLON
OH
44646
330-830-2498
16004
65358
TRACKMOBILE INC.
TRACK MOBILE DIV
1602 EXECUTIVE DRIVE
LAGRANGE
GA
30240
706-884-6651
80751
U S INDUSTRIES INC
777 S FLAGLER DR
WEST PALM BEACH
FL
33401
908-767-0700
Reference Numbers (Part Numbers)
H14144A
14144A
14144A
14144A
14144A
14144A
14144A
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER ALLOY OVERALL
1.760 INCHES MINIMUM AND
1.770 INCHES MAXIMUM
1 ROUND
2
