National Item Identification Number
00-276-2836
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1X0J7
VOLVO CONSTRUCTION EQUIPMENT NORTH
AMERICA INC
1 VOLVO DR
ASHEVILLE
NC
28803
828-650-2174
77873
ROCKFORD POWERTRAIN INC. DEL
DBA ROCKFORD POWERTRAIN INC
1200 WINDSOR RD
LOVES PARK
IL
61111
815-633-7460
77873
ROCKFORD POWERTRAIN INC. DEL
DBA ROCKFORD POWERTRAIN INC
1200 WINDSOR RD
LOVES PARK
IL
61111
815-633-7460
Reference Numbers (Part Numbers)
CL6284
CL6284
CL6284
2-07259
473119
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
0.448 INCHES MINIMUM AND
0.458 INCHES MAXIMUM
1 ROUND
0.990 IN