National Item Identification Number
00-282-7807
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
98738
HERLEY INDUSTRIES INC.
DBA D/B/A HERLEY CHICAGO
2250 E. DEVON SUITE 211
DES PLAINES
IL
60018
630-616-8633
21462
HANNAN SUPPLY COMPANY
1565 N 8TH ST
PADUCAH
KY
42001
270-685-4923
D9182
Reference Numbers (Part Numbers)
NAS70C161-438
04S111215-47
310-0447-00
310-0447-000
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL CORROSION RESISTING OVERALL
0.151 INCHES MINIMUM AND
0.161 INCHES MAXIMU