National Item Identification Number
00-282-8876
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
6N299
AGCO CORP
PARTS OPN
1500 N RADDANT RD
BATAVIA
IL
60510
630-879-3300
12793
AQUA-CHEM INC
CLEAVER-BROOKS DIV
11950 W LAKE PARK DR
421
MILWAUKEE
WI
53224
414-359-0600
0AHU0
Reference Numbers (Part Numbers)
B65084
109151
4980220
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
WOOL OR
COTTON OR
CELLULOSE OR
GLASS OVERALL
0.328 INCHES NOMINAL
1 ROUND;