National Item Identification Number
00-290-1437
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
62265
VOLVO TRUCKS NORTH AMERICA INC
7825 NATIONAL SERVICE RD
GREENSBORO
NC
27402
757-523-0973
23862
MILITARY VEHICLES OPN
GENERAL MOTORS TRUCK AND BUS GROUP
660 S BOULEVARD E
PONTIAC
MI
48341
248-456-5000
24617
23382
SEAGRAVE FIRE APPARATUS LLC
DIV SEAGRAVE FIRE APPARATUS LLC
105 E 12TH STREET
CLINTONVILLE
WI
54929
715-823-2141
Reference Numbers (Part Numbers)
10DF0925
10DF0925
125953008
2148585
2148585
8A31002
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
WOOL COMP 9R3 OVERALL
C-F-206,TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL;
