National Item Identification Number
00-291-4104
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K6952
GAST MANUFACTURING CO LTD
BEECH HOUSE KNAVES BEECH BUSINESS CE
TRE LOUDWATER
HIGH WYCOMBE
HP10 9SD
UNITED KINGDOM
01682 551 500
24123
GAST MFG CORP
2300 HWY M 139
97
BENTON HARBOR
MI
49022
269-926-6171
Reference Numbers (Part Numbers)
AA932
AA932
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CORK OVERALL
0.875 INCHES NOMINAL
1 ROUND
1.250 INCHES NOMINAL
1 ROUND
1 RE
