National Item Identification Number
00-297-4053
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
75324
KILGORE FLARES COMPANY LLC
KILGORE OPNS
155 KILGORE DRIVE
TOONE
TN
38381
731-228-5226
93712
ALLIANT DEFENSE ELECTRONICS SYSTEMS
INC
13133 34TH ST N
4648
CLEARWATER
FL
33758
727-572-1900
34895
HF GROUP INC.
DBA HOUSTON FEARLESS 76 INC.
203 W ARTESIA BLVD
COMPTON
CA
90220
310-605-0755
Reference Numbers (Part Numbers)
RA5643
RA5643
1041177
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
ALUMINUM ALLOY 2017 OVERALL
QQ-A-225/5 T4 FED SPEC SINGLE MATERIAL RESPONSE OVE