National Item Identification Number
00-362-1052
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
57526
83299
NACCO MATERIALS HANDLING GROUP INC.
DBA YALE MATERIALS HANDLING
1400 SULLIVAN DRIVE CALLER NO. 12011
GREENVILLE
NC
27834
908-788-3585
1LW55
REMY INTERNATIONAL INC
2902 ENTERPRISE DR
ANDERSON
IN
46013
765-778-6889
24617
89749
Reference Numbers (Part Numbers)
PBN77752A
PBN77752A
35037
583K963
805790
805790
805790
850818
850818
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 1010 OVERALL
QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
