National Item Identification Number
00-407-3599
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24655
GENRAD INC
600 RIVERPARK DRIVE
NORTH READING
MA
01864
978-370-6256
04901
BOONTON ELECTRONICS CORPORATION
DBA BOONS ELECTRONICS
25 EASTMANS RD
PARSIPPANY
NJ
07054
973-386-9696
Reference Numbers (Part Numbers)
8100-1400
840177
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
COPPER ALLOY OVERALL
NICKEL OVERALL
ESFP-5 FSCM 24655 MFR REF SINGLE TREATMENT